Level: Stage 2 UGB Programme Module: Quality Management for Organisational Excellence.
  Assignment Code: UGB 262
Submission date: Friday 10th May 2019
Moderated by: Sharp Cooper

 
Any work submitted is subject to the University’s Misconduct Regulations
 

Assignment Brief

 
Subject: Individual analysis of the included case study material
Notes:
 

  1. A maximum of 3000 words. You may use tables and diagrams which will not be included in the word count.
  2. The assignment must be presented in a form that complies with the basic conventions of a report format (see Guide to Basic Study Skills).
  3. Students are required to submit their coursework through JIRA. Only assessments submitted through JIRA will be marked. Any other submission including submission to your study centre in hard copy will be treated as a non-submission.
  4. If your centre supports Turnitin©, a copy of your Turnitin© originality report must be submitted in conjunction with your assignment.

If your centre supports Turnitin© or alternatively SafeAssign by Blackboard, a copy of your Turnitin© or SafeAssign originality report must be submitted in conjunction with your assignment.
 
 
 
Assessment
 
Your work will be assessed against the following criteria:

  1. Knowledge – Your work should show knowledge of the module content.
  2. Understanding – Your report should demonstrate an understanding of UGB 262 Quality Management for Organisational Excellence.
  3. Insight – Your report should show an ability to analyse the ‘case study’ in the light of the module content and your own reading.
  4. Clarity – Your report should be well structured and clearly presented. Notes:

 

  1. The assignment must be presented in a form that complies with the basic conventions of a report format (see Guide to Basic Study Skills). An electronic copy must be submitted to Turnitin via ‘Canvas’.

 

  1. Word count – 3000 words

Assignment Guidance Notes:
 
Business Report Structure.
Size 12 font, spacing 1.5, include word count at the end of the report.
 
Report Presentation

  • Front Sheet – Name / Student Number / Programme / Module / Date / Workshop Tutor Name
  • Table of Contents
  • Introduction
  • Main Body of Report – Analysis of theory and practice related to this ‘case study’
  • Conclusion and Recommendations
  • Appendix – not included in word count

 
General guidance and typical distribution of word count would be:
 
Introduction – 250 words
Main body analysis – 2000
Conclusion and Recommendations – 750 (collective)
 
 
The criteria for grading the assignment will be:
 
The assignment will be graded for individuals on the basis of the specific criteria outlined in the Generic Assessment Criteria (Undergraduate) on the following page.
 
Note:
 
The “Presentation” element of the Generic Assessment Criteria (Undergraduate) will also be used (additional to the above assignment guidance notes) to assess the report structure.
 
 
 
 
 
 
 
 
 
 
 
Refer to the Case study (below) for this assignment:
 
Case Study
 
The Talbots Tooling Company (TTC) was set up in the North East of England by a young graduate Engineer, in the early 1960’s.
The main items of manufacture comprised engineers’ rules, engineering callipers, scribes (the initial product range, which supplied the local engineering industry) and then expanding to include micrometers and a limited range of specialist items which required high quality materials and skills to produce accurate and long-lasting items.
Due to the decline of engineering in the North East of England and increased competition from globalization, TTC realised that, although the product range commanded great respect throughout the industry – from both customers and competitors, this course of business activity was untenable in the long term. An alternative, radical strategy had to be developed to ensure the survival of the business.
The TTC production plant was well equipped with a strong financial base, the workforce was loyal, and many of whom had begun their employment from school or university and worked their way up the corporate ladder.
The business has to evolve into a new, engineering-based entity. In 2018, an approach was made to TTC by a North-East Automotive supplier, for the design and manufacture of hand held precision equipment, initially for research and development work. The Automotive Board had acquired funding to develop new ‘power steering’ for vehicles and other pioneering techniques. In 2018, the Board signed a two-year contract with TTC to manufacture these cutting-edge products on a larger scale.
This new market will expanded rapidly over the next three years and TTC will receive worldwide recognition for its product range and company image. TTC now realises that the business must project itself to customers, suppliers and investors as a world class, 21st Century organisation with vision, energy and conscience.
 
Assignment
As the newly appointed Director of Quality for the Talbot Engineering Tooling Company, you have been asked by the Management Board to prepare a 3000 word report to explain how you would introduce a companywide quality improvement strategy. This report must also include a response to the following questions.
 

  1. What is Quality and what are the key elements of ‘Total Quality’
  2. List and explain the requirements for the Implementation of Total Quality Management,
  3. What strategies would you use to establish a quality culture in TTC,
  4. Describe how you would use ISO 9000 as an entry into TQM.